A, daily maintenance

Alloy saw blade also needs to be maintained? Yes, any same products need maintenance maintenance, although the product as a tool, but also a kind of consumables, if there is no reasonable maintenance, affect not only its sharp wear too fast, more is to reduce enterprise own quality!

1, the corresponding models and equipment

Alloy saw blade has strict requirements, different models for different devices, as the match, for example, to cut off the metal saw blade, used for cutting wood, a mistake, it's a regular some lay that can cut metal, cutting timber should faster, more sharp! If the saw blade used in metal circular saw machine, used for cutting wood, the result is that card, collapse tooth, saw blade consumption is too large, the cost is too high.

2, change the saw blade time grasp

Carbide saw blade is consumables, its service life, many companies believe that at the time of cutting processing, if life is not that won't change, can't use directly! Indeed, this is all companies are doing one thing, that is very normal, very reasonable, but it is very lazy a practice;

If a saw blade sawing 40 square, is the life that should be replaced when cut to 20 square, so after a rest, at least to cut 30 square, people will be more energetic after a rest, product is the same reason!

3, associated with its equipment

The stand or fall of metal circular saw machine equipment, also affects the quality of the saw blade, the coordination between, compatibility is very important, it is a good piece of saw blade if in very poor quality equipment, more than half of its efficacy for at least a discount.

Equipment shall not make material cutting, such not only affect the device performance and stability, the greatest harm is carbide saw blade, the same equipment should have its reasonable rest period, it can also drive the blade pranayama time.

Second, grasp the details

Details are important, often can decide the result, don't attach importance to this aspect of the enterprise, don't do very successful, at least use equipment and cutting costs are much higher than peers.

1, work before the end of the saw blade must be carefully clean, do not have any residue in the above, it helps to keep its sharp;

2, the installation process, must strictly abide by its technical guidance, not reverse installation, cannot reverse operation!

3, the corresponding equipment and materials must be checked before starting work, timely cleaning the dirty sawing materials;

4, in the process of work, such as finding is very hot, not directly to spray water, oil mist method should be adopted.

Above is the most basic maintenance methods, to delay the carbide saw blade, sharp must strictly operate according to the requirements of use.