A factor, rust

In general, carbide saw blade when not in use, should put ventilated, dry place, and let the packing cannot be damaged, it is best stored in wooden shelf.

The blade rust factor is usually as follows: the packaging is broken, placed where is wet, prone to water mist from the damaged entrance here contact with carbide saw blade, oxidation.

And may be because of where the store saw blade, inside, packing with the liquid into the saw blade cause oxidation, which can lead to rust. So we don't use the saw blade, it is important to note that the location of the placement, must keep ventilation and dry.

Second, how to deal with the rusty carbide saw blade

If found saw blade rusted, this time don't take it to use as usual, which easily causes the damage of saw blade, especially easy to cause collapse phenomenon such as tooth, we must want to undertake to operations such as rust, just can use.

1, check the rusty parts, if it is a matrix, which is very good processing, just use our regular scaling methods.

2, if the rusty parts in the sawtooth position, then some trouble, in this case, must carry on the processing effect of diamond grinding wheel, because saw is the most sensitive place of saw blade, if mishandled, will seriously affect the use of carbide saw blade, there is a lot of can lead to blade scrap.

The best treatment of saw blade rust, is actually the usual maintenance, some of the detail of the processing, prevention is the most effective method to resolve the problem.